Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Samsung UBD KM85C Outer Shell Replacement, Outer Shell: passo 1, immagine 1 di 1
    • On the back side of the unit, remove the three 8.1mm screws marked with a Phillips #1 screwdriver.

  2. Samsung UBD KM85C Outer Shell Replacement: passo 2, immagine 1 di 2 Samsung UBD KM85C Outer Shell Replacement: passo 2, immagine 2 di 2
    • From the back, lift the case upwards away from the unit then forwards, releasing the prongs on the front.

  3. Samsung UBD KM85C Outer Shell Replacement: passo 3, immagine 1 di 3 Samsung UBD KM85C Outer Shell Replacement: passo 3, immagine 2 di 3 Samsung UBD KM85C Outer Shell Replacement: passo 3, immagine 3 di 3
    • There is one group of wires located towards the front of the case and attached directly to the motherboard and the case. Using two fingers in a pinching motion, release the wire from the clip and disconnect it.

  4. Samsung UBD KM85C Outer Shell Replacement: passo 4, immagine 1 di 1
    • Remove the cover from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Team

Baylor, Team S2-G1, Johnson Spring 2018 Membro di Baylor, Team S2-G1, Johnson Spring 2018

BU-JOHNSON-S18S2G1

3 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 155