Salta al contenuto principale

Samsung SPH-A500 Logic Board Replacement

Cosa ti serve

  1. Samsung SPH-A500 Logic Board Replacement, Logic Board: passo 1, immagine 1 di 1
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

  2. Samsung SPH-A500 Logic Board Replacement: passo 2, immagine 1 di 1
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

  3. Samsung SPH-A500 Logic Board Replacement: passo 3, immagine 1 di 1
    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

  4. Samsung SPH-A500 Logic Board Replacement: passo 4, immagine 1 di 1
    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

  5. Samsung SPH-A500 Logic Board Replacement: passo 5, immagine 1 di 1
    • Pull the side tabs outward while simultaneously lifting up the circuit board.

    • Do not completely pull out the circuit board.

  6. Samsung SPH-A500 Logic Board Replacement: passo 6, immagine 1 di 1
    • Look for the clip at the top right corner of the logic board.

  7. Samsung SPH-A500 Logic Board Replacement: passo 7, immagine 1 di 1
    • Remove the clip from the logic board.

  8. Samsung SPH-A500 Logic Board Replacement: passo 8, immagine 1 di 1
    • Remove the logic board.

    • Replace the broken logic board with a new one.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 18-100, Johann Spring 2010 Membro di Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,033