Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back panel by pressing up on switch, located at the top on the back of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the four 4.5mm screws located on the back plate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the rubber screw cover using your fingernail.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the 4.5mm screw located underneath the rubber cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge the end of a plastic opening tool into the crack between the back panel and the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the back panel removed, the motherboard should be fully exposed.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the camera and volume buttons and place them in a safe spot until reassembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a plastic opening tool, unplug the ribbon cable connecting the front LCDs to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Detach the motherboard by grabbing the edges of it and lifting it straight out of the phone.
-