Aggiusta la tua roba Comunità Store

Samsung SGH-A237 Logic Board Replacement

Scritto Da: Theodore Johansen (e 5 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0

Difficoltà

Moderato

Passi

6

Tempo Necessario

10 - 15 minuti

Sezioni

1

Contrassegni

0

Introduzione

This repair guide shows how to remove and replace the logic board.

Strumenti

Ricambi

Nessuna parte specificata.

  1. Put the phone face down so that the battery cover is showing. Put the phone face down so that the battery cover is showing.

    • Put the phone face down so that the battery cover is showing.

    Traduci

  2. Use your thumb to push the cover down and off. Lift the battery off the device.

    • Use your thumb to push the cover down and off.

    • Lift the battery off the device.

    Traduci

  4. Remove the five screws with a size 00 screwdriver. There 4 in the corners and one on the top as shown. Remove the five screws with a size 00 screwdriver. There 4 in the corners and one on the top as shown.

    • Remove the five screws with a size 00 screwdriver. There 4 in the corners and one on the top as shown.

    Traduci

  5. Be sure that all 5 screws are removed and start to carefully remove the back cover by using the iPod Opening Tool in the slots on the bottom of the device. Note: some force must be applied when removing back cover. Note: some force must be applied when removing back cover.

    • Be sure that all 5 screws are removed and start to carefully remove the back cover by using the iPod Opening Tool in the slots on the bottom of the device.

    • Note: some force must be applied when removing back cover.

    Traduci

  6. Detach the tab from the logic board by using iPod Opening Tool (as shown).

    • Detach the tab from the logic board by using iPod Opening Tool (as shown).

    Traduci

  7. Use iPod Opening Tool to lift the green logic board carefully. Remove logic board from the device and replace with new one.

    • Use iPod Opening Tool to lift the green logic board carefully.

    • Remove logic board from the device and replace with new one.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Theodore Johansen

Membro da: 14/04/2010

1 Reputazione

2 Guide realizzate

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 29-81, Johann Spring 2010 Membro di Cal Poly, Team 29-81, Johann Spring 2010

CPSU-JOHANN-S10S29G81

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,737