Introduzione

Use this guide to replace your Samsung SGH A707 phone's keypad.

Press on the markings on the cover and pull it down to reveal the battery.
  • Press on the markings on the cover and pull it down to reveal the battery.

Aggiungi Commento

Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.
  • Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.

Aggiungi Commento

  • Here is the phone without the battery.

Aggiungi Commento

  • Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.

Aggiungi Commento

  • Use the prying tool the pry off the phone's plastic frame.

Aggiungi Commento

  • Use the prying tool to disconnect the rectangular connector.

Aggiungi Commento

  • Use the prying tool to disconnect the small connector.

Aggiungi Commento

  • Gently pull off the circuit board.

Aggiungi Commento

  • Here is the phone without the logic board.

Aggiungi Commento

  • Hold the phone and gently separate the circuit board that holds the dome switches and the front face of the phone, revealing the rubber keyboard.

Aggiungi Commento

  • Here is the phone without the dome switch circuit board.

Aggiungi Commento

  • Here is the phone and the rubber keyboard.

Aggiungi Commento

  • Here is the rubber keyboard and the dome switch circuit board. A quick inspection of these elements can reveal keypad malfunctions. Look for dirt or debris that do not belong there.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

yfm

Membro da: 06/11/2012

10 Reputazione

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 447