Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
-
Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the flat side panel by applying gentle pressure toward the bottom of the camera.
-
Remove the corner panel by applying pressure away from the shutter button.
-
Remove the top panel by applying gentle pressure away from the shutter button.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the front and back covers by pulling them straight apart.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the ribbon connector with your fingernail.
-
Pull the ribbon out of the connection.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the ribbon connected to the screen out from behind the button circuitry on the rear of the camera.
-
Feed the new screen's ribbon through the same slot it came out of.
-