Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The replacement of this flash light bulb will be needed when flash mode isn't working.
Cosa ti serve
-
-
Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
-
Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.
-
-
-
-
Remove the screw securing the shutter button to the camera frame.
-
Lift the shutter button to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.