Salta al contenuto principale

Introduzione

It may become necessary to replace the logic board on this cell phone in order to correct a problem. Following this guide will make removal quite easy.

  1. Slide the latch on the back of the phone up.
    • Slide the latch on the back of the phone up.

  2. Remove the battery.
    • Remove the battery.

  3. After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
    • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

  4. Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
    • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

  5. With a #0 Phillips screwdriver remove the screw which you just uncovered.
    • With a #0 Phillips screwdriver remove the screw which you just uncovered.

  6. Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
    • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

    • Then disconnect the small power connector near the top of the phone.

  7. Gently pry up the ribbon-type connector with the spudger.
    • Gently pry up the ribbon-type connector with the spudger.

  8. Carefully pry the logic board from the case with the spudger.
    • Carefully pry the logic board from the case with the spudger.

Linea Traguardo

Un'altra persona ha completato questa guida.

Nathan Brink

Membro da: 11/04/2010

19 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 34-59, Forte Spring 2010 Membro di Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Membri

14 Guide realizzate

Perfect instructions to remove the back of the case. Thanks

John Berg - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,647