Aggiusta la tua roba Comunità Store

Samsung SC MX-20 Lens Replacement

Introduzione

The lens of a camcorder is one of the most important components of the device. However, the lens is also susceptible to cracking and becoming dirty. A dirty/cracked lens may affect the outcome of the photographed results, so a replacement may be in order.

When the lens of a Samsung camcorder are damaged or non-functional, it would need to be replaced. This guide will show you how to remove the lens in your camcorder.

Cosa ti serve

  1. Samsung SC MX-20 Lens Replacement, Lens: passo 1, immagine 1 di 3 Samsung SC MX-20 Lens Replacement, Lens: passo 1, immagine 2 di 3 Samsung SC MX-20 Lens Replacement, Lens: passo 1, immagine 3 di 3

    • Unscrew the eight 4mm screws using the Phillips #000 screwdriver.

    Modifica

  2. Samsung SC MX-20 Lens Replacement: passo 2, immagine 1 di 3 Samsung SC MX-20 Lens Replacement: passo 2, immagine 2 di 3 Samsung SC MX-20 Lens Replacement: passo 2, immagine 3 di 3

    • Unplug the cord connecting the LCD section of the device.

    • Remove the left face of the device.

    • Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.

    Modifica

  4. Samsung SC MX-20 Lens Replacement: passo 3, immagine 1 di 3 Samsung SC MX-20 Lens Replacement: passo 3, immagine 2 di 3 Samsung SC MX-20 Lens Replacement: passo 3, immagine 3 di 3

    • After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.

    • Remove the battery compartment.

    Modifica

  5. Samsung SC MX-20 Lens Replacement: passo 4, immagine 1 di 3 Samsung SC MX-20 Lens Replacement: passo 4, immagine 2 di 3 Samsung SC MX-20 Lens Replacement: passo 4, immagine 3 di 3

    • Remove the lens assembly from the device.

    Modifica

  6. Samsung SC MX-20 Lens Replacement: passo 5, immagine 1 di 3 Samsung SC MX-20 Lens Replacement: passo 5, immagine 2 di 3 Samsung SC MX-20 Lens Replacement: passo 5, immagine 3 di 3

    • Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.

    • Remove the motherboard from the lens.

    • Remove the lens from the lens assembly.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 4

Tutti i Tempi: 164