Aggiusta la tua roba Comunità Store

Samsung NX2000 Lens Assembly Replacement

Introduzione

This guide will show you how to replace the lens assembly on the Samsung NX2000. It will show you a step by step replacement guide of how to remove parts of lens successfully. Begin with making sure your camera is turned off and removing the lens.

Cosa ti serve

  1. Samsung NX2000 Lens Assembly Replacement, Lens Assembly: passo 1, immagine 1 di 2 Samsung NX2000 Lens Assembly Replacement, Lens Assembly: passo 1, immagine 2 di 2

    • Begin by pressing the lens lock button to the right of the lens.

    • Release the button and turn the lens in a clockwise motion until you have removed the lens.

    Modifica

  2. Samsung NX2000 Lens Assembly Replacement: passo 2, immagine 1 di 3 Samsung NX2000 Lens Assembly Replacement: passo 2, immagine 2 di 3 Samsung NX2000 Lens Assembly Replacement: passo 2, immagine 3 di 3

    • Make sure your camera is turned off and flip your device upside down.

    • Slide the battery switch to the left and open the battery compartment.

    • Push the blue button up inside the battery compartment and remove the battery.

    Modifica

  4. Samsung NX2000 Lens Assembly Replacement: passo 3, immagine 1 di 3 Samsung NX2000 Lens Assembly Replacement: passo 3, immagine 2 di 3 Samsung NX2000 Lens Assembly Replacement: passo 3, immagine 3 di 3

    • Remove the four 4mm screws highlighted here with the Y0 screwdriver.

    • Using a tweezer, gently remove the outer silver lens lining.

    • Underneath will lie a black ring, which needs to removed using the same tweezer.

    Modifica

  5. Samsung NX2000 Lens Assembly Replacement: passo 4, immagine 1 di 3 Samsung NX2000 Lens Assembly Replacement: passo 4, immagine 2 di 3 Samsung NX2000 Lens Assembly Replacement: passo 4, immagine 3 di 3

    • Remove the final silver ring from the lens assembly using a tweezer.

    • Using a slanted tweezer, remove the highlighted pyramid screw from the compartment shown.

    • Remove the spring from the same compartment using the same tool.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Katarina Raic

Membro da: 02/09/16

288 Reputazione

2 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

USF Tampa, Team 7-4, Cheng Spring 2016 Membro di USF Tampa, Team 7-4, Cheng Spring 2016

USFT-CHENG-S16S7G4

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 860