Aggiusta la tua roba Comunità Store

Samsung NX2000 LCD Replacement

Introduzione

This guide will help you learn how to replace the LCD of Samsung NX2000. It will show you the step by step procedures for removing the display successfully. Be sure to use the correct tool that is safe for the removal and does not damage the device.

Cosa ti serve

  1. Samsung NX2000 LCD Replacement, LCD: passo 1, immagine 1 di 1

    • First begin by flipping your camera upside down.

    • Remove the seven 4mm screws from indicated circles shown using a Y0 screwdriver. There are three on the bottom, and two on each side

    • Remember to store the screws in a secure place.

    Modifica

  2. Samsung NX2000 LCD Replacement: passo 2, immagine 1 di 3 Samsung NX2000 LCD Replacement: passo 2, immagine 2 di 3 Samsung NX2000 LCD Replacement: passo 2, immagine 3 di 3

    • Insert a plastic opening tool into the gab between the camera body and the back panel. Carefully pry open the camera and separate the back panel.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

    Modifica

  3. Samsung NX2000 LCD Replacement: passo 3, immagine 1 di 3 Samsung NX2000 LCD Replacement: passo 3, immagine 2 di 3 Samsung NX2000 LCD Replacement: passo 3, immagine 3 di 3

    • Before taking it apart you'll have to detach the display ribbon cable.

    • Use a plastic opening tool, lift up the black strip to release the ribbon cable from the connector.

    Modifica

  5. Samsung NX2000 LCD Replacement: passo 4, immagine 1 di 3 Samsung NX2000 LCD Replacement: passo 4, immagine 2 di 3 Samsung NX2000 LCD Replacement: passo 4, immagine 3 di 3

    • Separate the LCD half compartment of the camera from the main body.

    Modifica

  6. Samsung NX2000 LCD Replacement: passo 5, immagine 1 di 1

    • Remove the four 1mm screws with the Y0 screwdriver.

    Modifica

  7. Samsung NX2000 LCD Replacement: passo 6, immagine 1 di 3 Samsung NX2000 LCD Replacement: passo 6, immagine 2 di 3 Samsung NX2000 LCD Replacement: passo 6, immagine 3 di 3

    • Use a plastic opening tool or tweezers to lift the green tape located on top of the LCD controller board.

    • Detach the two ribbon cables, by first lifting the black tab on top of the connector.

    • Pull the ribbon cables out of the connectors with tweezers or two fingers.

    Modifica

  8. Samsung NX2000 LCD Replacement: passo 7, immagine 1 di 3 Samsung NX2000 LCD Replacement: passo 7, immagine 2 di 3 Samsung NX2000 LCD Replacement: passo 7, immagine 3 di 3

    • Place blue plastic spudger in between LCD screen and plastic surrounding.

    • Begin to lift up slowly, removing the LCD screen from the main frame.

    Modifica

  9. Samsung NX2000 LCD Replacement: passo 8, immagine 1 di 1

    • The LCD screen is now separated form the main frame.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Maria Zamora

Membro da: 02/09/16

155 Reputazione

1 Guida realizzata

Distintivi: 6

+3 altri distintivi

Team

USF Tampa, Team 7-4, Cheng Spring 2016 Membro di USF Tampa, Team 7-4, Cheng Spring 2016

USFT-CHENG-S16S7G4

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 833