Aggiusta la tua roba Comunità Store

Samsung NP540U3C-A02UB Fan Replacement

Introduzione

This guide covers how to replace the fan for the Samsung Series 5 NP540U3C-A02UB.

The fan provides cooling for the internal components of the laptop. After long periods of use or intensive use of the laptop, the internal components heat up. This is mitigated by removing heat from the inside of the laptop using a fan, as components may become damaged when overheated. If you believe your laptop is experiencing overheating, see our troubleshooting guide for possible causes before attempting to replace the fan.

Before replacing the fan, inspect the fan for dust and debris that may be affecting the fans ability to cool the laptop. Debris can be removed from the fan using a soft cloth or cotton swabs and dust can be removed using a compressed air duster. Make sure the vents of the laptop are also clear of dust and debris to eliminate any possibilities short of a failing fan.

Cosa ti serve

  1. Samsung NP540U3C-A02UB Fan Replacement, Fan: passo 1, immagine 1 di 1

    • Turn off the laptop and disconnect from the charging cable before beginning disassembly.

    • Place the laptop flat with its bottom facing up.

    Modifica

  2. Samsung NP540U3C-A02UB Fan Replacement: passo 2, immagine 1 di 2 Samsung NP540U3C-A02UB Fan Replacement: passo 2, immagine 2 di 2

    • Remove the 1x 4mm Phillips #00 screw labeled "HDD Memory".

    Modifica

  3. Samsung NP540U3C-A02UB Fan Replacement: passo 3, immagine 1 di 3 Samsung NP540U3C-A02UB Fan Replacement: passo 3, immagine 2 di 3 Samsung NP540U3C-A02UB Fan Replacement: passo 3, immagine 3 di 3

    • Gently release the three clips holding the HDD cover with the plastic opening tool.

    • Remove the HDD cover from the device.

    Modifica

  5. Samsung NP540U3C-A02UB Fan Replacement: passo 4, immagine 1 di 1

    • Peel the yellow tape up so it no longer blocks the fan's wires and screw.

    Modifica

  6. Samsung NP540U3C-A02UB Fan Replacement: passo 5, immagine 1 di 1

    • Remove the two 2.4mm Phillips #00 screws attaching the fan to the case.

    • Remove the two 6mm Phillips #00 screws attaching the fan to the case.

    Modifica

  7. Samsung NP540U3C-A02UB Fan Replacement: passo 6, immagine 1 di 2 Samsung NP540U3C-A02UB Fan Replacement: passo 6, immagine 2 di 2

    • Using the plastic opening tool, gently disconnect the fan from the motherboard by unplugging the wire.

    Modifica

  8. Samsung NP540U3C-A02UB Fan Replacement: passo 7, immagine 1 di 1

    • Remove the fan from the case.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Colby Bolger

Membro da: 03/28/22

277 Reputazione

2 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

UMass Dartmouth, Team C-1, Gurgel Spring 2022 Membro di UMass Dartmouth, Team C-1, Gurgel Spring 2022

UMASSD-GURGEL-S22SCG1

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 12

Tutti i Tempi: 262