Salta al contenuto principale

Samsung NP-R540-JA09US Front Panel Replacement

Cosa ti serve

  1. Samsung NP-R540-JA09US Front Panel Replacement, Battery: passo 1, immagine 1 di 1
    • Turn off laptop before starting.

    • Remove power cable before starting.

    • Flip the laptop over so that the bottom of the laptop is facing upwards.

  2. Samsung NP-R540-JA09US Front Panel Replacement: passo 2, immagine 1 di 1
    • Pull the two latches outward.

  3. Samsung NP-R540-JA09US Front Panel Replacement: passo 3, immagine 1 di 2 Samsung NP-R540-JA09US Front Panel Replacement: passo 3, immagine 2 di 2
    • Slide the battery out of the laptop.

  4. Samsung NP-R540-JA09US Front Panel Replacement, Optical Drive: passo 4, immagine 1 di 1
    • Remove securing screw with the PH0 head.

  5. Samsung NP-R540-JA09US Front Panel Replacement: passo 5, immagine 1 di 1
    • Slide the optical drive out and remove it from the device.

  6. Samsung NP-R540-JA09US Front Panel Replacement, Keyboard: passo 6, immagine 1 di 1
    • Remove the two Phillips #0 screws labeled KBD.

    • There are 5 clips along the top of the keyboard. Insert a thin opener tool (iSessamo tool or similar) between each clip and the keyboard tray to release it.

    • Make sure to pry the metal keyboard base and not the keycaps.

  7. Samsung NP-R540-JA09US Front Panel Replacement: passo 8, immagine 1 di 1
    • Do not bend your keyboard as shown in this picture.

    • Lift the keyboard up to release catches on the sides, then slide the keyboard towards the screen to slide tabs out of the slots at the bottom.

  8. Samsung NP-R540-JA09US Front Panel Replacement: passo 9, immagine 1 di 2 Samsung NP-R540-JA09US Front Panel Replacement: passo 9, immagine 2 di 2
    • Disconnect the keyboard cable from the motherboard.

  9. Samsung NP-R540-JA09US Front Panel Replacement, Front Panel: passo 10, immagine 1 di 1
    • Remove the two screws with a Phillips #00 screwdriver.

  10. Samsung NP-R540-JA09US Front Panel Replacement: passo 11, immagine 1 di 1
    • Remove the highlighted screws with a Phillips #0 Screwdriver.

  11. Samsung NP-R540-JA09US Front Panel Replacement: passo 12, immagine 1 di 3 Samsung NP-R540-JA09US Front Panel Replacement: passo 12, immagine 2 di 3 Samsung NP-R540-JA09US Front Panel Replacement: passo 12, immagine 3 di 3
    • Pry the front panel away from the base with an Opening Tool.

  12. Samsung NP-R540-JA09US Front Panel Replacement: passo 13, immagine 1 di 2 Samsung NP-R540-JA09US Front Panel Replacement: passo 13, immagine 2 di 2
    • Disconnect the speaker wire from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 13

Tutti i Tempi: 468