Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Mythic SGH-a897 Daughterboard Replacement

Introduzione

Use this guide to replace the daughterboard in the Samsung Mythic SGH-a897.

Cosa ti serve

  1. Samsung Mythic SGH-a897 Daughterboard Replacement, Battery: passo 1, immagine 1 di 1

    • To remove the phone's back cover, slide your fingernail into the slit at the bottom of your phone.

    Traduci

  2. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 2, immagine 1 di 1

    • Place your finger on either bottom corner of the battery slot and lift to remove the battery.

    Traduci

  3. Samsung Mythic SGH-a897 Daughterboard Replacement, Rear Case: passo 3, immagine 1 di 1

    • Using a Phillips #00 Screwdriver, remove the six 5 mm screws from the back casing of the phone.

    Traduci

  4. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 4, immagine 1 di 1

    • Using the iFixit Opening Tool, insert the tool into the seam between the back case and the rest of the phone.

    • Working along the seam, pry the back casing from the phone.

    Traduci

  5. Samsung Mythic SGH-a897 Daughterboard Replacement, Camera: passo 5, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement, Camera: passo 5, immagine 2 di 2

    • Carefully remove the camera by using the iFixit Tool to pry the camera cable from the motherboard.

    • Carefully remove the camera from the phone's motherboard.

    Traduci

  7. Samsung Mythic SGH-a897 Daughterboard Replacement, Motherboard: passo 6, immagine 1 di 1

    • Using a Phillips #00 screwdriver, remove the two 3.8mm screws.

    Traduci

  8. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 7, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement: passo 7, immagine 2 di 2

    • Using tweezers, firmly grip the black lever at the bottom of the motherboard.

    • Use the tweezers to flip the black lever up so that it is upright from the motherboard.

    Traduci

  9. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 8, immagine 1 di 1

    • Remove the ZIF cable by carefully using the tweezers to pull the cable straight out.

    Traduci

  10. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 9, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement: passo 9, immagine 2 di 2

    • On the right from the lever, use the tweezers to unclip the black connector.

    Traduci

  11. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 10, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement: passo 10, immagine 2 di 2

    • Use the tweezers to unclip the orange ribbon cable from the left side of the phone.

    Traduci

  12. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 11, immagine 1 di 1

    • Use the tweezers to unclip the other orange ribbon cable along the left side of the phone.

    • Work carefully, as this is a very delicate part of the phone's motherboard that can easily be broken.

    Traduci

  13. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 12, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement: passo 12, immagine 2 di 2

    • Using either side of the tweezers, slide a side of the tweezer underneath the red and blue wires and the capacitor.

    • Carefully lift the capacitor away from the phone.

    Traduci

  14. Samsung Mythic SGH-a897 Daughterboard Replacement: passo 13, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement: passo 13, immagine 2 di 2

    • DO NOT remove the motherboard completely. One more clip on the motherboard's backside needs to be removed.

    • Carefully tilt the motherboard up from the back of the phone.

    • Use tweezers to unclip the black connector.

    Traduci

  15. Samsung Mythic SGH-a897 Daughterboard Replacement, Daughterboard: passo 14, immagine 1 di 2 Samsung Mythic SGH-a897 Daughterboard Replacement, Daughterboard: passo 14, immagine 2 di 2

    • use the tweezers to unclip the connector as shown.

    • This is the only attachment that is holding the daughterboard to the motherboard. You can no remove the daughterboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 8 altri collaboratori

Collin Gordon

Membro da: 04/08/13

45 Reputazione

3 Guide realizzate

Distintivi: 3

Team

Cal Poly, Team 17-1, Regan Spring 2013 Membro di Cal Poly, Team 17-1, Regan Spring 2013

CPSU-REGAN-S13S17G1

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 300