Salta al contenuto principale

Samsung MV900F Flash Bulb Assembly Replacement

Cosa ti serve

  1. Samsung MV900F Flash Bulb Assembly Replacement, Battery: passo 1, immagine 1 di 1
    • Slide the lock towards the middle of the camera, in the same direction of the arrow.

  2. Samsung MV900F Flash Bulb Assembly Replacement: passo 2, immagine 1 di 1
    • Push the blue battery holder up in the direction of the arrow.

  3. Samsung MV900F Flash Bulb Assembly Replacement: passo 3, immagine 1 di 1
    • Pull the battery out of the battery slot.

  4. Samsung MV900F Flash Bulb Assembly Replacement, Screen: passo 4, immagine 1 di 2 Samsung MV900F Flash Bulb Assembly Replacement, Screen: passo 4, immagine 2 di 2
    • Use tweezers to remove the four rubber screw covers.

  5. Samsung MV900F Flash Bulb Assembly Replacement: passo 5, immagine 1 di 2 Samsung MV900F Flash Bulb Assembly Replacement: passo 5, immagine 2 di 2
    • Remove the four Phillips 2.381 mm screws on back side of camera and one Phillips 2.381 mm screw on the bottom of the camera, using a Phillips #00 screwdriver.

  6. Samsung MV900F Flash Bulb Assembly Replacement: passo 6, immagine 1 di 1
    • Remove the back casing by just carefully pulling the casing off of the camera.

  7. Samsung MV900F Flash Bulb Assembly Replacement: passo 7, immagine 1 di 1
    • Use the Phillips #00 screw driver to remove the four 2.381 mm screws next to the screen hinge.

  8. Samsung MV900F Flash Bulb Assembly Replacement: passo 8, immagine 1 di 1
    • Use plastic opening tool to disconnect screen connector from the control board.

  9. Samsung MV900F Flash Bulb Assembly Replacement: passo 9, immagine 1 di 1
    • Remove the old screen.

  10. Samsung MV900F Flash Bulb Assembly Replacement, Lens Assembly: passo 10, immagine 1 di 1
    • Remove the 2.381 mm screw with a Phillips #00 screwdriver.

  11. Samsung MV900F Flash Bulb Assembly Replacement: passo 11, immagine 1 di 1
    • Use the plastic opening tool to remove the silver metal lens cover.

  12. Samsung MV900F Flash Bulb Assembly Replacement: passo 12, immagine 1 di 1
    • Use the tweezers to remove the black electrical tape covering the copper connector to the control board.

  13. Samsung MV900F Flash Bulb Assembly Replacement: passo 13, immagine 1 di 1
    • From the front of the camera, push the lens through the back of the camer.a

  14. Samsung MV900F Flash Bulb Assembly Replacement: passo 14, immagine 1 di 2 Samsung MV900F Flash Bulb Assembly Replacement: passo 14, immagine 2 di 2
    • Use a pair of tweezers to flip up the black retaining bar on each of the two ZIF connectors.

  15. Samsung MV900F Flash Bulb Assembly Replacement: passo 15, immagine 1 di 2 Samsung MV900F Flash Bulb Assembly Replacement: passo 15, immagine 2 di 2
    • Remove the lens assembly from the camera.

  16. Samsung MV900F Flash Bulb Assembly Replacement, Flash Bulb Assembly: passo 16, immagine 1 di 1
    • Remove the 2.381 mm screw that is holding the copper to the control board with a Phillips #00 screw driver.

  17. Samsung MV900F Flash Bulb Assembly Replacement: passo 17, immagine 1 di 1
    • Use tweezers to pull copper connector from the control board.

  18. Samsung MV900F Flash Bulb Assembly Replacement: passo 18, immagine 1 di 1
    • Use the plastic opening tool to pry the control board up, thus allowing the flash bulb assembly to be removed.

  19. Samsung MV900F Flash Bulb Assembly Replacement: passo 19, immagine 1 di 1
    • Beginning with the battery on the side, gently pull upwards to remove the entire flash bulb assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 285