Parti

Nessuna parte richiesta.

  1. Lay the TV screen-side down on a flat, soft surface.
    • Lay the TV screen-side down on a flat, soft surface.

    • Remove four Phillips screws attaching the stand to the TV.

    Aggiungi Commento

  2. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Slide the stand out from the bottom of the TV.

    Aggiungi Commento

    • Remove fifteen Phillips screws securing the rear case to the front.

    • If present, remove four Phillips screws for the VESA mount.

    • Carefully lift the rear case upwards to separate it from the frame of the TV.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Steven Carlton

Membro da: 19/08/2013

534 Reputazione

3 Guide realizzate

The guide says that 15 Phillips screws have to be removed from the back. The actual number of the Phillips screws is indeed 15. However, the supplied picture marks locations of 14 Phillips screws only. The 15th screw is located near the left edge of the rear connector cluster. It has to be removed as well.

Andrey - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 21

Tutti i Tempi: 1,814