Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Juke Outer Casing Replacement

Cosa ti serve

  1. Samsung Juke Outer Casing Replacement, Battery: passo 1, immagine 1 di 1

    • Press and hold down the button on the bottom side of the phone with your finger.

    Traduci

  2. Samsung Juke Outer Casing Replacement: passo 2, immagine 1 di 2 Samsung Juke Outer Casing Replacement: passo 2, immagine 2 di 2

    • While holding the button down, remove the back cover of the phone.

    Traduci

  3. Samsung Juke Outer Casing Replacement, Camera/Speaker: passo 3, immagine 1 di 1

    • Remove the four screws from the back of the phone using a Phillips #00 screwdriver.

    Traduci

  4. Samsung Juke Outer Casing Replacement: passo 4, immagine 1 di 1

    • Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.

    Traduci

  5. Samsung Juke Outer Casing Replacement: passo 5, immagine 1 di 3 Samsung Juke Outer Casing Replacement: passo 5, immagine 2 di 3 Samsung Juke Outer Casing Replacement: passo 5, immagine 3 di 3

    • Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.

    • Failure to open USB port cover at this stage may result in damaging the device.

    Traduci

  6. Samsung Juke Outer Casing Replacement: passo 6, immagine 1 di 1

    • Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.

    Traduci

  8. Samsung Juke Outer Casing Replacement: passo 7, immagine 1 di 2 Samsung Juke Outer Casing Replacement: passo 7, immagine 2 di 2

    • Use the iFixit opening tool to remove the camera/speaker from the motherboard.

    • Practice caution to prevent damage to the attaching ribbon.

    Traduci

  9. Samsung Juke Outer Casing Replacement: passo 8, immagine 1 di 2 Samsung Juke Outer Casing Replacement: passo 8, immagine 2 di 2

    • Use the iFixit opening tool to gently pry the camera/speaker off.

    Traduci

  10. Samsung Juke Outer Casing Replacement, Motherboard: passo 9, immagine 1 di 2 Samsung Juke Outer Casing Replacement, Motherboard: passo 9, immagine 2 di 2

    • Use the iFixit opening tool to remove the yellow tab on the motherboard.

    Traduci

  11. Samsung Juke Outer Casing Replacement: passo 10, immagine 1 di 2 Samsung Juke Outer Casing Replacement: passo 10, immagine 2 di 2

    • Use the iFixit opening tool to remove the other orange tab to free the motherboard.

    Traduci

  12. Samsung Juke Outer Casing Replacement: passo 11, immagine 1 di 3 Samsung Juke Outer Casing Replacement: passo 11, immagine 2 di 3 Samsung Juke Outer Casing Replacement: passo 11, immagine 3 di 3

    • To completely remove the motherboard, use the iFixit opening tool to leverage it up, then use your fingers to pull it out.

    • Do not be alarmed if the volume and hold buttons are removed from the motherboard.

    Traduci

  13. Samsung Juke Outer Casing Replacement, Keyboard: passo 12, immagine 1 di 3 Samsung Juke Outer Casing Replacement, Keyboard: passo 12, immagine 2 di 3 Samsung Juke Outer Casing Replacement, Keyboard: passo 12, immagine 3 di 3

    • Open/swivel the phone so the back of the LCD panel is visible.

    • Use the iFixit opening tool to pry the keypad from the hinge on the back of the device.

    • A moderate amount of force may need to be applied.

    Traduci

  14. Samsung Juke Outer Casing Replacement, Click Wheel: passo 13, immagine 1 di 2 Samsung Juke Outer Casing Replacement, Click Wheel: passo 13, immagine 2 di 2

    • Using your fingernail, remove the stickers covering the screws on the back of the LCD casing.

    • Remove six 3.5 mm screws from the back of the device using a Phillips #00 screwdriver.

    Traduci

  15. Samsung Juke Outer Casing Replacement: passo 14, immagine 1 di 3 Samsung Juke Outer Casing Replacement: passo 14, immagine 2 di 3 Samsung Juke Outer Casing Replacement: passo 14, immagine 3 di 3

    • Using a generous amount of force, use your hands to pry loose the casing from the LCD panel.

    • If necessary, use the iFixit opening tool to completely free the casing.

    • Be careful not to sever the wire connecting the outer casing to the display board.

    Traduci

  16. Samsung Juke Outer Casing Replacement: passo 15, immagine 1 di 3 Samsung Juke Outer Casing Replacement: passo 15, immagine 2 di 3 Samsung Juke Outer Casing Replacement: passo 15, immagine 3 di 3

    • Using the iFixit opening tool, remove the click wheel from the board.

    • After you have freed the edges, use the spudger to release the clip holding it flush to the board.

    Traduci

  17. Samsung Juke Outer Casing Replacement: passo 16, immagine 1 di 3 Samsung Juke Outer Casing Replacement: passo 16, immagine 2 di 3 Samsung Juke Outer Casing Replacement: passo 16, immagine 3 di 3

    • Unlock the ribbon connection by pressing down on the black clip.

    • Carefully pull the click wheel away from the device.

    Traduci

  18. Samsung Juke Outer Casing Replacement, Outer Casing: passo 17, immagine 1 di 2 Samsung Juke Outer Casing Replacement, Outer Casing: passo 17, immagine 2 di 2

    • Using tweezers, grip the red and blue wires that attach the audio earpiece to the outer casing and pull.

    • This is glued on so a moderate amount of force may be needed.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Ryan Turner

Membro da: 04/15/10

104 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team 6-18, Maness Spring 2010 Membro di Cal Poly, Team 6-18, Maness Spring 2010

CPSU-MANESS-S10S6G18

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 13

Tutti i Tempi: 2,328