Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press and hold down the button on the bottom side of the phone with your finger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the button down, remove the back cover of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four screws from the back of the phone using a Phillips #00 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the iFixit opening tool to remove the camera/speaker from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the iFixit opening tool to gently pry the camera/speaker off.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.