Parti

Nessuna parte richiesta.

  1. Apply pressure to the back cover and slide it forward towards the camera.
    • Apply pressure to the back cover and slide it forward towards the camera.

    • Lift the back cover off the phone.

  2. Holding the phone firmly, use the notches to grip and lift up the battery.
    • Holding the phone firmly, use the notches to grip and lift up the battery.

  3. Remove the four 4.45mm screws at the corners of the phone.
    • Remove the four 4.45mm screws at the corners of the phone.

  4. Use the plastic opening tool to unhinge the locks around the edges of the phone. Do not worry about the inner components of the phone; they are not connected to this case.
    • Use the plastic opening tool to unhinge the locks around the edges of the phone.

    • Do not worry about the inner components of the phone; they are not connected to this case.

  5. Lift the casing off of the phone.
    • Lift the casing off of the phone.

  6. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  7. With the screws removed, locate the antenna.
    • With the screws removed, locate the antenna.

  8. Using a Phillips head screwdriver, remove the 4.50mm screw holding the antenna in place.
    • Using a Phillips head screwdriver, remove the 4.50mm screw holding the antenna in place.

  9. Using the plastic opener tool, squeeze gently on the antenna cable connector and lift to remove the connector from its position.
    • Using the plastic opener tool, squeeze gently on the antenna cable connector and lift to remove the connector from its position.

  10. Gently lift up on the antenna and remove it from the back of the device.
    • Gently lift up on the antenna and remove it from the back of the device.

  11. Remove the two 3.50mm screws connecting the motherboard to the case.
    • Remove the two 3.50mm screws connecting the motherboard to the case.

  12. Use the plastic opener tool to detach the three ribbons on the motherboard. Use the plastic opener tool to detach the three ribbons on the motherboard. Use the plastic opener tool to detach the three ribbons on the motherboard.
    • Use the plastic opener tool to detach the three ribbons on the motherboard.

  13. Lift out the top right ribbon from its slot on the motherboard.
    • Lift out the top right ribbon from its slot on the motherboard.

  14. Use the plastic opener tool to unhinge the the locks on the side of the motherboard connecting it to the front casing. Use the plastic opener tool to unhinge the the locks on the side of the motherboard connecting it to the front casing.
    • Use the plastic opener tool to unhinge the the locks on the side of the motherboard connecting it to the front casing.

  15. Lift the motherboard away from the front casing.
    • Lift the motherboard away from the front casing.

  16. After removing lifting up on the motherboard, the front casing and center frame should be separated as shown.
    • After removing lifting up on the motherboard, the front casing and center frame should be separated as shown.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jacob Michener

Membro da: 10/10/2011

31 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 3-13, Regan Fall 2011 Membro di Cal Poly, Team 3-13, Regan Fall 2011

CPSU-REGAN-F11S3G13

4 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 660