Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Apply pressure to the back cover and slide it forward towards the camera.
-
Lift the back cover off the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Holding the phone firmly, use the notches to grip and lift up the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 4.45mm screws at the corners of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool to unhinge the locks around the edges of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the screws removed, locate the antenna.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips head screwdriver, remove the 4.50mm screw holding the antenna in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the plastic opener tool, squeeze gently on the antenna cable connector and lift to remove the connector from its position.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently lift up on the antenna and remove it from the back of the device.
-