Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the release tab away from the battery.
-
Slide the battery towards the release tab and then pull the battery away from the camcorder.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the camcorder so that the strap side is facing you.
-
Locate and remove the three 4.5mm Phillips #00 screws around the hand strap.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the camcorder so that the battery slot is facing you.
-
Located in the top left corner of the battery slot, remove the 4.5mm Phillips #00 screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the camcorder so you are looking at the bottom of the camcorder.
-
Locate and remove the last three 4.5mm Phillips #00 screws.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With both hands, pull the side strap apart from the rest of the camcorder.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the camcorder so that back is facing you. Then flip open the LCD screen.
-
Locate and remove the 4.5mm Phillips #00 screws in the LCD screen base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Close the LCD screen. Then lift the silver base away from the camcorder.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate and remove the two 3.5mm Phillips #00 screws from the side of the camcorder.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gradually pry off the outer casing using a prying tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate and remove the three 4mm Phillips #00 screws around the lens.
-
Gently remove the lens.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.