Salta al contenuto principale

Introduzione

If your battery does not charge consistently, or will not charge at all, your charging port may be faulty. If you are experiencing charging difficulties, the charging port may need to be replaced. This guide will show you how to do so.

  1. Place the plastic opening tool between the face of the display and  rim of the back cover of the device. Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.
    • Place the plastic opening tool between the face of the display and rim of the back cover of the device.

    • Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.

  2. By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.
    • By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.

    • Try to separate evenly on all sides until the screen detaches from the device backing completely.

    • If this is the first time removing the back cover, it will be rather difficult to separate it from the tablet.

  3. Remove the back cover after the entire rim is disconnected.
    • Remove the back cover after the entire rim is disconnected.

  4. Remove the two 4 mm Phillips #000 screws securing the micro USB port. Remove the two 4 mm Phillips #000 screws securing the micro USB port.
    • Remove the two 4 mm Phillips #000 screws securing the micro USB port.

  5. Using the plastic opening tool, disconnect the charge port from the motherboard. Once disconnected, lift to remove the charging port.
    • Using the plastic opening tool, disconnect the charge port from the motherboard.

    • Once disconnected, lift to remove the charging port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 30 persone hanno completato questa guida.

Trent Chapman

Membro da: 01/10/2015

1.336 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 12-15, Maness Fall 2015 Membro di Cal Poly, Team 12-15, Maness Fall 2015

CPSU-MANESS-F15S12G15

4 Membri

12 Guide realizzate

6 Commenti

It is so amazing and it works!

alva chan - Replica

Thanks a lot!

You make me a big economy by doing this myself with YOUR instructions !

Raphael

refelo123 - Replica

What model number is this device specifically? It says WiFi, but I have the same one from a network carrier. Would this charging port work for that? Model sm-707v is the one that I have.

tailoredtoteach - Replica

Thanks for the instructions, it looks simple , so I ordered the docking assembly and I replace it by myself.

You saved me a lot of money, thanks again!

wim-zelf - Replica

With these instructions I ordered part from Amazon and replaced charging port and tablet charges again. Thanks!

Philip Holly - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 20

Ultimi 30 Giorni: 71

Tutti i Tempi: 13,706