Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement

Cosa ti serve

  1. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Rear Case: passo 1, immagine 1 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Rear Case: passo 1, immagine 2 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Rear Case: passo 1, immagine 3 di 3
    • Make sure the device is turned off before attempting to disassemble it.

    • Using a plastic opening tool, wedge in the seam between the screen and the case.

    • Rock the tool by moving it towards and away from the middle of the screen, trying to separate the tape holding the screen and case together.

  2. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 2, immagine 1 di 2 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 2, immagine 2 di 2
    • After separating the latches holding the screen and case together, slowly take the screen off the case.

  3. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Motherboard: passo 3, immagine 1 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Motherboard: passo 3, immagine 2 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Motherboard: passo 3, immagine 3 di 3
    • Use the plastic opening tool to lift up the black ZIF (zero insertion force) connector.

    • Use your hands to pull the black cable out of its slot.

  4. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 4, immagine 1 di 2 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 4, immagine 2 di 2
    • Use the plastic opening tool to lift the ZIF (zero insertion force) connector holding the ribbon cable.

    • Pull out the battery's ribbon cable.

  5. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 5, immagine 1 di 2 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 5, immagine 2 di 2
    • Use the plastic opening tool to lift up the latch to the ribbon cable.

    • Remove the ribbon cable from the connector.

  6. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 6, immagine 1 di 1
    • Remove the seven 4mm PH000 screws holding the motherboard in place.

  7. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 7, immagine 1 di 1
    • Use the plastic opening tool to pry up the tab holding the motherboard in place.

  8. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 8, immagine 1 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 8, immagine 2 di 3 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement: passo 8, immagine 3 di 3
    • Use the precision tweezers to remove the black plastic corner on top of the motherboard.

    • Use the plastic opening tool to pull the motherboard out of the case.

  9. Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Charging Port: passo 9, immagine 1 di 2 Samsung Galaxy Tab E Lite 7 Kids Charging Port Replacement, Charging Port: passo 9, immagine 2 di 2
    • Use a soldering iron to heat 4 spots of solder from the motherboard.

    • To learn more about soldering, check out iFixit's soldering technique guide.

    • Use precision tweezers to remove the charging port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team S19-G2, Hoffman Spring 2017 Membro di USF Tampa, Team S19-G2, Hoffman Spring 2017

USFT-HOFFMAN-S17S19G2

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 6,564