Samsung Galaxy Tab E 9.6 Verizon Front Panel Replacement

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

Questo passaggio è privo di traduzione. Aiuta a tradurlo

Questo passaggio è privo di traduzione. Aiuta a tradurlo

Insert the plastic opening tool by wedging it between the device's screen and back cover.
Move the plastic tool around the edges of the device to undo the plastic lips holding the casing together.
This step may require more force than expected. If difficult, try using a suction cup on the screen.

Questo passaggio è privo di traduzione. Aiuta a tradurlo

This process will become easier as more clips are separated.
Use your hands to gently pull the back cover off the device after about half of the clips are separated.
A suction cup can be used in this step as well to assist in pulling the device apart.

Questo passaggio è privo di traduzione. Aiuta a tradurlo

Attrezzo utilizzato in questo passaggio:

Tweezers

$4.99

Compra

Turn the device over so the screen is facing down. Locate the front panel assembly connector at the top left corner of the motherboard.
To remove the connector, first use a pair of tweezers and flip the connector lock upwards towards the battery.

Questo passaggio è privo di traduzione. Aiuta a tradurlo

Once you've undone the connector lock, use a pair of tweezers to pull the cable front its housing.

Questo passaggio è privo di traduzione. Aiuta a tradurlo

Turn the device back over and use a plastic opening tool to detach the adhesive glue securing the front casing.
You will need to wedge a plastic opening tool in between the front casing and the screen. Then move the tool around the perimeter of the device to break the adhesive.
Once you've loosed the front panel enough with the prying tool, you can use your hands to pull the front panel off of the device.