Samsung Galaxy Tab A 9.7 Rear Camera Replacement

Introduzione

This replacement guide will help you easily follow the steps in order to replace the rear camera on a Samsung Galaxy Tab A 9.7. For clarification purposes, the rear camera is underneath the motherboard. The difficulty of this guide is moderate and requires special attention to details.

Cosa ti serve

Passo 1 Rear Camera

Samsung Galaxy Tab A 9.7 Rear Camera Replacement, Rear Camera: passo 1, immagine 1 di 1

Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.

Traduci

Passo 2

Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.

Traduci

Passo 3

Remove one of the iFixit opening tools and begin to go around the device with the other one until the back cover pops off.

Traduci

Passo 4

Remove five 2.8 mm screws using the Phillips #000 screwdriver.

Traduci

Passo 5

Disconnect all wires and strips that connect the motherboard to any other part of the device with an iFixit opening tool.
Lift up gently on all wires and strips.

Traduci

Passo 6

Lift the motherboard out of the back panel using an iFixit opening tool.
Be gentle when wiggling the motherboard out from underneath the battery's protective edge.

Traduci