Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

After damaging your rear-facing camera, you might feel intimidated to dig into the Samsung Galaxy Tab 4 8.0. Replacement of the camera will only require a plastic opening tool, tweezers, muscle strength, and these easy to follow instructions.

  1. Before disassembling your Samsung Galaxy Tab 4 8.0, be sure it is powered off. At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel's metal rim. Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.
    • Before disassembling your Samsung Galaxy Tab 4 8.0, be sure it is powered off.

    • At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel's metal rim.

    • Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.

  2. Continue prying the blue plastic opening tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel. As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process.
    • Continue prying the blue plastic opening tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel.

    • As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process.

    • You might hear several popping noises caused by the plastic clips coming undone.

  3. Kit cacciaviti Manta

    112 punte per ogni riparazione.

    Upgrade Your Toolbox

    Kit cacciaviti Manta

    Upgrade Your Toolbox
  4. To avoid damaging the screen, gently set the tablet with the LCD screen faced down. Firmly grasp the back plastic casing and lift it away from the front assembly panel.
    • To avoid damaging the screen, gently set the tablet with the LCD screen faced down.

    • Firmly grasp the back plastic casing and lift it away from the front assembly panel.

  5. The back camera will be located near the top of the tablet in the center above the battery. Carefully insert the flat end of the blue plastic opening tool under the metal rectangular end of the back camera’s cable connector.
    • The back camera will be located near the top of the tablet in the center above the battery.

    • Carefully insert the flat end of the blue plastic opening tool under the metal rectangular end of the back camera’s cable connector.

  6. Slightly apply pressure and move the blue plastic opening tool downwards to pop the back camera’s metallic rectangular connector from its socket on the logic board.
    • Slightly apply pressure and move the blue plastic opening tool downwards to pop the back camera’s metallic rectangular connector from its socket on the logic board.

  7. Squeeze the metallic rectangular piece with the tweezers to gently lift it from it's pit. Squeeze the metallic rectangular piece with the tweezers to gently lift it from it's pit.
    • Squeeze the metallic rectangular piece with the tweezers to gently lift it from it's pit.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Yuly Flores

Membro da: 14/09/2015

687 Reputazione

1 Guida realizzata

Team

CSU Fullerton, Team 1-3, Bruce Fall 2015 Membro di CSU Fullerton, Team 1-3, Bruce Fall 2015

CSUF-BRUCE-F15S1G3

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 834