Salta al contenuto principale

Samsung Galaxy Tab 4 7.0 Screen Replacement

Cosa ti serve

  1. Samsung Galaxy Tab 4 7.0 Screen Replacement, Back Panel: passo 1, immagine 1 di 2 Samsung Galaxy Tab 4 7.0 Screen Replacement, Back Panel: passo 1, immagine 2 di 2
    • Starting at any corner, insert the pry tool between the chrome screen frame and black phone housing.

    • Slide the pry tool around the tablet while applying force to pry the screen away from the phone housing.

  2. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 2, immagine 1 di 1
    • Carefully separate the rear housing from the front panel assembly.

  3. Samsung Galaxy Tab 4 7.0 Screen Replacement, Motherboard: passo 3, immagine 1 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement, Motherboard: passo 3, immagine 2 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement, Motherboard: passo 3, immagine 3 di 3
    • Using the bent tweezers, carefully pull the flat cables away from the connectors.

    • Do not bend the flat cables at the tips as they may become permanently deformed.

  4. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 4, immagine 1 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 4, immagine 2 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 4, immagine 3 di 3
    • Using the plastic opening tool, gently pry the chip connections away from the motherboard.

  5. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 5, immagine 1 di 2 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 5, immagine 2 di 2
    • Use the Phillips 000 screwdriver to remove the remaining five 1.2 mm screws.

  6. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 6, immagine 1 di 2 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 6, immagine 2 di 2
    • Use extreme care while removing the motherboard to avoid damaging the component.

    • Remove the motherboard by rotating it away from the rest of the phone as shown in the first photo.

  7. Samsung Galaxy Tab 4 7.0 Screen Replacement, Battery: passo 7, immagine 1 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement, Battery: passo 7, immagine 2 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement, Battery: passo 7, immagine 3 di 3
    • You do not need to remove the motherboard in order to remove the battery as the photos may indicate.

    • Work the spudger underneath the battery as shown and pry the battery away from the phone case.

    • The battery is attached to the case with adhesive, so a bit of force is required during removal.

  8. Samsung Galaxy Tab 4 7.0 Screen Replacement, Screen: passo 8, immagine 1 di 2 Samsung Galaxy Tab 4 7.0 Screen Replacement, Screen: passo 8, immagine 2 di 2
    • Evenly heat the surface of the screen using your heating tool to loosen the adhesive that is holding the screen to the phone case.

    • If using the heating pad, you may have to reheat it once or twice during this process.

    • If you're using a heat gun, avoid heating one spot for more than a few seconds.

  9. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 9, immagine 1 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 9, immagine 2 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 9, immagine 3 di 3
    • Carefully insert the spudger between the glass and the chrome outer frame of the tablet.

    • Now, slowly pry your way around the screen to loosen the glass from the frame.

  10. Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 10, immagine 1 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 10, immagine 2 di 3 Samsung Galaxy Tab 4 7.0 Screen Replacement: passo 10, immagine 3 di 3
    • After you’ve removed the glass from the screen, feed the chip connection through the phone casing.

    • The screen may need a little more force to separate from the upper edge of the tablet.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 36 persone hanno completato questa guida.

Aubrey Goodwin

Membro da: 08/31/15

2.700 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 1-3, Remmell Fall 2015 Membro di USF Tampa, Team 1-3, Remmell Fall 2015

USFT-REMMELL-F15S1G3

4 Membri

12 Guide realizzate

11 Commenti

Where is the microfuse located?

bbruns - Replica

Do you have to remove the battery to replace the screen?

Vic Rector - Replica

This is digitizer replacement guide - not screen replacement !!

K P - Replica

This worked perfectly for me. Thank you!

gjarmour - Replica

This worked perfectly for me. I just bought the assembly instead of going through the full deal (which if I had it would have saved me about 30 bucks overall). But was easy enough to do anyway. I still intend to get the digitizer/glass and finish so I have a spare for future breaks. (I have kids and they are hard on these tablets)

gjarmour - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 39

Tutti i Tempi: 46,139