Aggiusta la tua roba Comunità Store

Samsung Galaxy Tab 4 10.1 Motherboard Replacement

Introduzione

Replacement guide for the motherboard on a Samsung Galaxy Tab 4 10.1 android tablet.

Cosa ti serve

  1. Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Battery: passo 1, immagine 1 di 2 Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Battery: passo 1, immagine 2 di 2

    • Insert the wedge of the nylon spudger and slide it between the front and back panels until the back comes off.

    Traduci

  2. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 2, immagine 1 di 1

    • Peel off the green tape that covers the connectors for the three black strips.

    • Use the tip of a spudger or your fingernail to flip up the small retaining flaps.

    Traduci

  3. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 3, immagine 1 di 1

    • Use a Phillips #00 screwdriver to remove the four 3.2mm screws.

    Traduci

  5. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 4, immagine 1 di 1

    • Detach the red, blue, and black cables by prying up on the white connector from the motherboard.

    • If using fingers instead, pull evenly on the full width of the cable so the wires are not overly strained.

    • If you pull too hard you can damage the connector on the circuit board. Use a spudger or tweezers to push down on the black connector on the board while gently prying the battery connector loose. The connector breaks VERY easily.

    Traduci

  6. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 5, immagine 1 di 1

    • Use the nylon spudger to remove the battery by prying up on the edges.

    Traduci

  7. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 6, immagine 1 di 1

    • Once the battery is loose, lift it out of the device.

    Traduci

  8. Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Motherboard: passo 7, immagine 1 di 2 Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Motherboard: passo 7, immagine 2 di 2

    • Remove the two 2.7mm Phillips #00 screws from the motherboard.

    Traduci

  9. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 8, immagine 1 di 2 Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 8, immagine 2 di 2

    • Use the flat end of a spudger to pry up and disconnect the five press-fit connectors from the motherboard.

    Traduci

  10. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 9, immagine 1 di 2 Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 9, immagine 2 di 2

    • Use a spudger to pry up the motherboard, and remove it from the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

Blake Klein

Membro da: 01/29/17

70.510 Reputazione

50 Guide realizzate

Distintivi: 43

+40 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 26

Tutti i Tempi: 4,170