Aggiusta la tua roba ComunitĂ  Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Galaxy Tab 10.1 Rear Panel Replacement

Introduzione

In this guide, you will learn how to remove the back panel for either replacement or to get to other components in your Samsung Galaxy Tab 10.1.

Cosa ti serve

  1. Samsung Galaxy Tab 10.1 Rear Panel Replacement, Rear Panel: passo 1, immagine 1 di 2 Samsung Galaxy Tab 10.1 Rear Panel Replacement, Rear Panel: passo 1, immagine 2 di 2

    • Place the bottom of the tablet towards you.

    • Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.

    • On model GT-P7500, this step is omitted, as that model doesn't have these 2 screws.

    Traduci

  3. Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 2, immagine 1 di 3 Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 2, immagine 2 di 3 Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 2, immagine 3 di 3

    • Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.

    • Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.

    • Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.

    • Be sure to work carefully, as prying too firmly can crack the screen.

    Traduci

  4. Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 3, immagine 1 di 3 Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 3, immagine 2 di 3 Samsung Galaxy Tab 10.1 Rear Panel Replacement: passo 3, immagine 3 di 3

    • Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 13 persone hanno completato questa guida.

Autore

con 11 altri collaboratori

Davie Sy

Membro da: 09/30/13

1.430 Reputazione

4 Guide realizzate

Distintivi: 14

+11 altri distintivi

Team

Cal Poly, Team 13-5, Forte Fall 2013 Membro di Cal Poly, Team 13-5, Forte Fall 2013

CPSU-FORTE-F13S13G5

5 Membri

17 Guide realizzate

4 Commenti

Very interesting, but my note 10.1 does not have these two screws adjacent to the charge point as you describe. So mine is a bit different. There are no screws anywhere on the tablet. So how do I take the back off mine ??

James Tobin - Replica

It currently won’t start and I have read about a fix that requires the back to be removed.

James Tobin - Replica

What - How - Ware ? Yes I looked online for the parts, no I was not successful in finding the parts online. Can you tell me ware you found the parts for this project?

Brian Elling - Replica

i need the panel

Ay Bami - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 30

Tutti i Tempi: 39,148