Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Melt the adhesive on the screen by applying a blow dryer directly on the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge the metal spudger in between the screen and the frame to begin separating them.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the metal spudger around the phone at least once.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the tweezers to disconnect the screen from the phone by detaching the connection.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Clean the rest of the adhesive left on the phone by scraping it off with a metal tool.
-
Apply rubbing alcohol on the adhesive to make sure phone is free of any adhesive. Do this by applying some rubbing alcohol onto a napkin.
-
Lightly proceed to clean the phone with that napkin.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
3 Commenti
I bought a digitizer with fog and polarizer and a new front glass, it came with the loca. What else do I need to make the complete LCD screen assembly?