Salta al contenuto principale

Introduzione

Prerequisite guide only! Battery disconnect step for the Galaxy S10.

Parti

Nessuna parte specificata.

  1. Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera. Pry upwards to disconnect the connector from its socket. When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.
    • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

    • Pry upwards to disconnect the connector from its socket.

    • When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

    • Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro da: 03/01/2018

161.319 Reputazione

412 Guide realizzate

Team

iFixit Membro di iFixit

Community

137 Membri

16.056 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 40