Salta al contenuto principale

Samsung Galaxy Prevail Touch Screen Replacement

Cosa ti serve

  1. Samsung Galaxy Prevail Touch Screen Replacement, Touch Screen: passo 1, immagine 1 di 1
    • Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.

  2. Samsung Galaxy Prevail Touch Screen Replacement: passo 2, immagine 1 di 1
    • Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.

  3. Samsung Galaxy Prevail Touch Screen Replacement: passo 3, immagine 1 di 1
    • Remove the (6) 4mm screws using a Phillips #00 screwdriver.

  4. Samsung Galaxy Prevail Touch Screen Replacement: passo 4, immagine 1 di 1
    • Using the black spudger, carefully unhinge and pry the secondary rear panel , which houses the camera lens and speaker.

    • The metal trim of the headphone jack may come loose during this process.

  5. Samsung Galaxy Prevail Touch Screen Replacement: passo 5, immagine 1 di 1
    • Using the spudger, gently pry upward on the motherboard by the right side.

    • Motherboard is connected to shield plate with ribbon cable.

  6. Samsung Galaxy Prevail Touch Screen Replacement: passo 6, immagine 1 di 1
    • Using a spudger, carefully unhinge the gray shield plate by lifting upwards on the right side.

    • The shield plate will not be fully removed, it is attached to the front panel with a ribbon cable.

  7. Samsung Galaxy Prevail Touch Screen Replacement: passo 7, immagine 1 di 1
    • Using the spudger lift up the LCD screen and replace with the new screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team 17-6, Blackwell Fall 2016 Membro di USF Tampa, Team 17-6, Blackwell Fall 2016

USFT-BLACKWELL-F16S17G6

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 725