Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Samsung Galaxy Note II Motherboard Assembly Replacement

Solo Prerequisita
Questa guida รจ destinata a essere usata solo come prerequisito per altre guide. Da sola รจ incompleta.

Cosa ti serve

  1. Samsung Galaxy Note II Motherboard Assembly Replacement, Motherboard Assembly: passo 1, immagine 1 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement, Motherboard Assembly: passo 1, immagine 2 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement, Motherboard Assembly: passo 1, immagine 3 di 3
    • Use a spudger to disconnect the vibrator/power button assembly cable connector.

    • Disconnect the antenna cable connector.

    • Disconnect the display cable connector.

  2. Samsung Galaxy Note II Motherboard Assembly Replacement: passo 2, immagine 1 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement: passo 2, immagine 2 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement: passo 2, immagine 3 di 3
    • Disconnect the front-facing camera cable connector.

    • Disconnect the headphone jack cable connector.

    • Disconnect the digitizer cable connector.

  3. Samsung Galaxy Note II Motherboard Assembly Replacement: passo 3, immagine 1 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement: passo 3, immagine 2 di 3 Samsung Galaxy Note II Motherboard Assembly Replacement: passo 3, immagine 3 di 3
    • Use the spudger to disconnect the antenna cable connector from the motherboard.

    • Disconnect the soft button cable connector.

    • Disconnect the USB board cable connector.

  4. Samsung Galaxy Note II Motherboard Assembly Replacement: passo 4, immagine 1 di 1
    • Remove the 3 mm Phillips #00 screw securing the motherboard to the display assembly.

  5. Samsung Galaxy Note II Motherboard Assembly Replacement: passo 5, immagine 1 di 2 Samsung Galaxy Note II Motherboard Assembly Replacement: passo 5, immagine 2 di 2
    • Gently remove the motherboard.

    • Hold the motherboard by its edges to prevent ESD damage. Be careful not to snag it on any cables as you extract it from the display assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro da: 10/18/12

465.243 Reputazione

538 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

16.560 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 47