Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This guide shows how to replace the camera.

  1. Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.
    • Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.

  2. Slide your fingernail or plastic opening tool along the edge of the rear case. Lift the case gently from the base.
    • Slide your fingernail or plastic opening tool along the edge of the rear case.

    • Lift the case gently from the base.

  3. Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base. Lift the battery out of its recess.
    • Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base.

    • Lift the battery out of its recess.

  4. Place your fingernail in the groove of the stylus pen.
    • Place your fingernail in the groove of the stylus pen.

    • Pull the stylus pen away from the phone.

  5. Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  6. Remove the twelve 4mm Phillips #00 screws from the back chassis.
    • Remove the twelve 4mm Phillips #00 screws from the back chassis.

  7. Insert the plastic opening tool into the Stylus Pen placement holder.
    • Insert the plastic opening tool into the Stylus Pen placement holder.

    • Lift the plastic opening tool so that the midframe separates from the base.

  8. Remove the single screw beside headphone jack. Remove the single screw beside headphone jack.
    • Remove the single screw beside headphone jack.

  9. Use tweezers to remove both antenna clips. Use a spudger to disconnect six cable connectors.
    • Use tweezers to remove both antenna clips.

    • Use a spudger to disconnect six cable connectors.

  10. Pull up on the motherboard with tweezers.
    • Pull up on the motherboard with tweezers.

  11. Unclip the camera connecting cable using the plastic opening tool from the motherboard
    • Unclip the camera connecting cable using the plastic opening tool from the motherboard

    • Remove loose camera from base

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 37 persone hanno completato questa guida.

Brittany Gail

Membro da: 23/09/2014

8.318 Reputazione

8 Guide realizzate

Team

USF Tampa, Team 2-2, Blackwell Fall 2014 Membro di USF Tampa, Team 2-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S2G2

4 Membri

25 Guide realizzate

Awesome, phone disassembly and fingernail painting at same time :) Thanks for your time to post this!

Chris G - Replica

Hi

Thanks for the nice instructions

Do you know if I can use a Note 4 camera (or any better!) for my Note 3?

Are they different in connections?

Thanks

hameidfehri - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 30

Tutti i Tempi: 12,386