Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This guide explains the way to replacing the headphone jack.

  1. Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.
    • Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.

  2. Slide your fingernail or plastic opening tool along the edge of the rear case. Lift the case gently from the base.
    • Slide your fingernail or plastic opening tool along the edge of the rear case.

    • Lift the case gently from the base.

  3. Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base. Lift the battery out of its recess.
    • Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base.

    • Lift the battery out of its recess.

  4. Place your fingernail in the groove of the stylus pen.
    • Place your fingernail in the groove of the stylus pen.

    • Pull the stylus pen away from the phone.

  5. LCD iPhone Screen Fix Kits

    The budget option, covered by our Lifetime Warranty.

    Shop Kits

    LCD iPhone Screen Fix Kits

    Cut repair costs, not quality.

    Shop Kits
  6. Remove the twelve 4mm Phillips #00 screws from the back chassis.
    • Remove the twelve 4mm Phillips #00 screws from the back chassis.

  7. Insert the plastic opening tool into the Stylus Pen placement holder.
    • Insert the plastic opening tool into the Stylus Pen placement holder.

    • Lift the plastic opening tool so that the midframe separates from the base.

  8. Remove the single screw beside headphone jack. Remove the single screw beside headphone jack.
    • Remove the single screw beside headphone jack.

  9. Use tweezers to remove both antenna clips. Use a spudger to disconnect six cable connectors.
    • Use tweezers to remove both antenna clips.

    • Use a spudger to disconnect six cable connectors.

  10. Pull up on the motherboard with tweezers.
    • Pull up on the motherboard with tweezers.

  11. Insert the spudger into the headphone jack.
    • Insert the spudger into the headphone jack.

  12. Lift the spudger to separate the jack assembly from the motherboard.
    • Lift the spudger to separate the jack assembly from the motherboard.

    • Pull to remove.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 22 persone hanno completato questa guida.

Brittany Gail

Membro da: 23/09/2014

8.318 Reputazione

8 Guide realizzate

Team

USF Tampa, Team 2-2, Blackwell Fall 2014 Membro di USF Tampa, Team 2-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S2G2

4 Membri

25 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 25

Tutti i Tempi: 13,964