Salta al contenuto principale
  1. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: passo 1, immagine 1 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: passo 1, immagine 2 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: passo 1, immagine 3 di 3
    • This is the back of the device and where you willl begin to take it apart

    • It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

    • Use the plastic opening tools to pry along the indicated box.

    • Lift up the silver piece to reveal the rest of the back cover.

  2. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: passo 2, immagine 1 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: passo 2, immagine 2 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: passo 2, immagine 3 di 3
    • Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.

    • Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

    • Remove the back cover.

    • At this point use anti-static gloves or do NOT take it apart on carpet.

  3. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: passo 3, immagine 1 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: passo 3, immagine 2 di 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: passo 3, immagine 3 di 3
    • Unscrew the two 2 mm screws indicated by the red circles with the #00 Philips Screwdriver.

    • Starting with the black motherboard connector, remove the module indicated by the red box in the second picture.

    • Replace the microSD port with a similar model.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Tyler Salomone

Membro da: 22/09/2014

1.024 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 3-7, Brown Fall 2014 Membro di USF Tampa, Team 3-7, Brown Fall 2014

USFT-BROWN-F14S3G7

3 Membri

9 Guide realizzate

2 Commenti

Be sure to include screw lengths to the nearest mm on all guides.

Dan Brown - Replica

In this guide, you missed a step on removing the battery.

John Peterson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 3,805