Salta al contenuto principale

Samsung Galaxy Media Player 5 Earpiece Speaker Replacement

Cosa ti serve

  1. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: passo 1, immagine 1 di 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: passo 1, immagine 2 di 2
    • Remove the SD Memory Card before working on the device.

    • Use a Phillips screwdriver to remove the 10 mm screw near the SD Memory Card port.

  2. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 2, immagine 1 di 1
    • White caps cover screws on both sides of the charging port. Use the angled tweezers to remove them.

    • Use a blow dryer on low heat if necessary to loosen the adhesive.

  3. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 3, immagine 1 di 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 3, immagine 2 di 2
    • Using a Phillips head screwdriver, unscrew the two 10 mm screws located on either side of the charging port.

  4. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 4, immagine 1 di 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 4, immagine 2 di 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 4, immagine 3 di 3
    • Using the opening pick, pry at the bottom and work around each edge of the device until the front cover and back cover housing is separated.

    • You will hear a popping sound to indicate the separation.

  5. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 5, immagine 1 di 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 5, immagine 2 di 2
    • Using the plastic opening tool, apply an upward force to detach the battery and the tab attached to it.

  6. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 6, immagine 1 di 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 6, immagine 2 di 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: passo 6, immagine 3 di 3
    • Using the plastic opening tool, apply an upward force to detach the speaker earpiece.

    • Use the tweezers to attach the new earpiece speaker in place of the original.

    • Use a blow dryer, on low heat settings, to loosen the adhesive on the speaker earpiece.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 374