Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Attach a small suction cup to the lower half of the glass screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Apply pressure to the middle section of the screen while pulling up the lower edge by pivoting your wrist.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once you've opened a large enough gap, insert a Spudger tool between the glass and the motherboard.
-
Slide the Spudger tool around the gap until the screen is completely separated from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the rear panel up and away to completely separate it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the spudger tool between the LCD and the glass screen.
-
Slide the spudger tool in between the screen and the display until both are completely separated from each other.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
2 Commenti
Hola, cual es el numero de parte de la pantalla a reemplazar?
It appears that OEM screens are no longer available for this phone. I was able to find this third party display assembly that looks like it would work, but I can’t attest to its functionality, so there would be a bit of risk involved for you. Hope that helps!