Introduzione

Use this guide to replace your Samsung Luna LCD display.

  1. Attach a small suction cup to the lower half of the glass screen.
    • Attach a small suction cup to the lower half of the glass screen.

    Aggiungi Commento

  2. Apply pressure to the middle section of the screen while pulling up the lower edge by pivoting your wrist.
    • Apply pressure to the middle section of the screen while pulling up the lower edge by pivoting your wrist.

    Aggiungi Commento

    • Once you've opened a large enough gap, insert a Spudger tool between the glass and the motherboard.

    • Slide the Spudger tool around the gap until the screen is completely separated from the motherboard.

    • The LCD is very fragile,be careful when sliding the spudger around the gap.

    Aggiungi Commento

    • Pull the rear panel up and away to completely separate it.

    • make sure the panel is completely detached from the phone frame before separating it.

    Aggiungi Commento

    • Place the spudger tool between the LCD and the glass screen.

    • Slide the spudger tool in between the screen and the display until both are completely separated from each other.

    • The LCD is very fragile, do not apply excessive force when prying the glass panel

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

xingyu chen

Membro da: 14/02/2018

230 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S6-G1, Eyestone Spring 2018 Membro di USF Tampa, Team S6-G1, Eyestone Spring 2018

USFT-EYESTONE-S18S6G1

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 51

Tutti i Tempi: 267