Introduzione

Outline what you are going to teach someone how to do.

  1. Insert a finger nail or plastic opening tool between the back cover and the device.
    • Insert a finger nail or plastic opening tool between the back cover and the device.

    • Gently pry the rear cover off of the back of the phone.

    Aggiungi Commento

  2. Using a finger, pull the SIM card down out of its slot.
    • Using a finger, pull the SIM card down out of its slot.

    • Remove the SIM card.

    • The pictured device is missing the SIM card and battery.

    Aggiungi Commento

    • Using a Phillips #00 screwdriver remove the eleven 3 mm screws.

    Aggiungi Commento

    • Insert a plastic opening tool between the screen and the back of the device.

    • Starting at the bottom of the device, gently slide the tool along the edges of the screen.

    • Gently pry the main assembly from the midframe of the device.

    • When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.

    Aggiungi Commento

    • Use the flat end a spudger to disconnect the front-facing camera cable connecter.

    Aggiungi Commento

    • Using tweezers, or your fingers, remove the front-facing camera.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Sean Kramer

Membro da: 14/02/2018

927 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S5-G4, Eyestone Spring 2018 Membro di USF Tampa, Team S5-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S5G4

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 81

Tutti i Tempi: 639