Introduzione

Replace the glass digitizer and the LCD screen.

  1. Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone. Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone.
    • Starting from the indent, use a finger nail or guitar pick to separate the back from the body of the phone.

  2. Once the cover is removed you'll find the battery that reads "SAMSUNG" Use a fingernail or a plastic tool such as a guitar pick to lift up on the bottom indent of the battery. Do not use metal tool as it can be dangerous.
    • Once the cover is removed you'll find the battery that reads "SAMSUNG"

    • Use a fingernail or a plastic tool such as a guitar pick to lift up on the bottom indent of the battery.

    • Do not use metal tool as it can be dangerous.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Use a plastic tool to pop out piece shown. Use a plastic tool to pop out piece shown.
    • Use a plastic tool to pop out piece shown.

  5. Detach the screen connector.
    • Detach the screen connector.

  6. Use a blower dryer or heating pad to heat up the screen. If this step is skipped it may result in a broken screen and/or LCD.
    • Use a blower dryer or heating pad to heat up the screen.

    • If this step is skipped it may result in a broken screen and/or LCD.

    • This is done to loosen the glue holding the screen in place.

  7. Use a thin plastic tool such as a guitar pick or plastic prying tool to lift out the glass digitizer and LCD screen around the edges. Do this slowly and carefully as both parts can crack very easily. Make sure your tool is plastic as a metal tool can damage the screen.
    • Use a thin plastic tool such as a guitar pick or plastic prying tool to lift out the glass digitizer and LCD screen around the edges.

    • Do this slowly and carefully as both parts can crack very easily.

    • Make sure your tool is plastic as a metal tool can damage the screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

My friend set on his phone the screen is broken. The phone will come on but the screen will not light up.

Rudolph Mc Alister - Replica

Same! For TWO phones now… have you had any luck on any suggestions or figuring anything out???

Faith Dockery -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 28

Ultimi 30 Giorni: 122

Tutti i Tempi: 1,086