Salta al contenuto principale

Samsung Eternity Input Jack Replacement

Cosa ti serve

    • Remove the back battery cover.

  1. Samsung Eternity Input Jack Replacement: passo 2, immagine 1 di 1
    • Using the Phillips #00 screwdriver, remove the phone's battery.

  2. Samsung Eternity Input Jack Replacement: passo 3, immagine 1 di 1
    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  3. Samsung Eternity Input Jack Replacement: passo 4, immagine 1 di 2 Samsung Eternity Input Jack Replacement: passo 4, immagine 2 di 2
    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  4. Samsung Eternity Input Jack Replacement, Input Jack: passo 5, immagine 1 di 1
    • Peel off the Identification sticker

  5. Samsung Eternity Input Jack Replacement: passo 6, immagine 1 di 1
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  6. Samsung Eternity Input Jack Replacement: passo 7, immagine 1 di 1
    • Pop the speaker plug out of its socket.

  7. Samsung Eternity Input Jack Replacement: passo 8, immagine 1 di 1
    • Peel the button sensor off the top of the case.

  8. Samsung Eternity Input Jack Replacement: passo 9, immagine 1 di 1
    • Peel the Input jack assembly out of the case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sven

Membro da: 04/18/11

52 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 15-11, Regan Spring 2011 Membro di Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,450