Introduzione

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's digitizer and screen.

Cosa ti serve

Passo 1 Back Case

Remove the back battery cover.

Traduci

Passo 2

Using a nylon spudger, remove the phone's battery.

Traduci

Passo 3

Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver.

Traduci

Passo 4

Use a nylon spudger to gently pry the silver plastic back plate from the body of the phone.

Traduci

Passo 5 Motherboard

Samsung Eternity Digitizer and Screen Replacement, Motherboard: passo 5, immagine 1 di 1

It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.
Pull the antenna plug out of its socket.

Traduci

Passo 6

Samsung Eternity Digitizer and Screen Replacement: passo 6, immagine 3 di 3

Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

Traduci

Passo 7

Pop the red hinged-release lever away from its ribbon. Then pull it out.

Traduci

Passo 8

Peel the button sensor on the side of the motherboard off of the case.

Traduci

Passo 9

Samsung Eternity Digitizer and Screen Replacement: passo 9, immagine 3 di 3

Slightly pull up one side of the motherboard.
Pull the button/microphone plug out of its socket.
Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

Traduci

Passo 10

You have successfully removed the motherboard from the phone.

Traduci

Passo 11 Digitizer and Screen

Samsung Eternity Digitizer and Screen Replacement, Digitizer and Screen: passo 11, immagine 1 di 1

Flip the phone over so you are looking at the front screen of the phone.

Traduci

Passo 12

Samsung Eternity Digitizer and Screen Replacement: passo 12, immagine 3 di 3

Use a small tool to pry the digitizer and screen (together) from the frame of the phone.
This may take some time and careful work because it is glued down to the frame.
Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.

Traduci

Passo 13

Samsung Eternity Digitizer and Screen Replacement: passo 13, immagine 3 di 3

Next, carefully pull the digitizer away from the screen.
At this point you can replace either the screen or the digitizer.
Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.