Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Phillips #00 screwdriver, remove the phone's battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pop the antenna plug off of its socket with a pair of metal tweezers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Peel the button sensor on the side of the motherboard off of the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the antennae/speaker component out of its casing. You need to use a little force to get the piece to pop out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
You will now be able to replace the antenna/speaker module.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.