Salta al contenuto principale

Introduzione

Motherboard prerequisite only.

Parti

Nessuna parte specificata.

  1. Use the flat end of a spudger to disconnect the front-facing camera cable connector. Use the flat end of a spudger to disconnect the front-facing camera cable connector.
    • Use the flat end of a spudger to disconnect the front-facing camera cable connector.

  2. Carefully disconnect the digitizer display cable.
    • Carefully disconnect the digitizer display cable.

  3. Use a spudger to disconnect the display cable connector.
    • Use a spudger to disconnect the display cable connector.

  4. Remove the two 3 mm Phillips #00 screws.
    • Remove the two 3 mm Phillips #00 screws.

  5. Lift the micro-USB end of the motherboard away from the display assembly and pull it down. Be mindful that you don't snag the motherboard on any cables as you remove it. Be mindful that you don't snag the motherboard on any cables as you remove it.
    • Lift the micro-USB end of the motherboard away from the display assembly and pull it down.

    • Be mindful that you don't snag the motherboard on any cables as you remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 28