Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Make sure your Chromebook is turned off before you begin.
-
Set the labtop face down on a flat surface.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the nine 5 mm screws on the bottom cover using a Phillips #0 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the back cover panel with a plastic opening tool, and work it all the way around the computer.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the cover is loose, remove the back cover panel using your hands.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the four 4 mm screws holding the battery in place with a Phillips #0 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the wire that connects the battery to the motherboard by pulling upward.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.