Aggiusta la tua roba Comunità Store

Samsung Captivate Glide QWERTY Keyboard Replacement

Introduzione

How to replace the keyboard on a Samsung Captivate Glide.

Cosa ti serve

  1. Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: passo 1, immagine 1 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: passo 1, immagine 2 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: passo 1, immagine 3 di 3

    • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

    Traduci

  2. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 2, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 2, immagine 2 di 2

    • Remove battery with plastic opening tool or finger.

    Traduci

  3. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 3, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 3, immagine 2 di 2

    • Remove the seven screws from backplate using the #00 screwdriver.

    Traduci

  4. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 4, immagine 1 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 4, immagine 2 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 4, immagine 3 di 3

    • Remove the back plate using the plastic opening tool.

    • There is a lip on each side, and both must be pried up.

    • You can work your way around the edges after prying the two sides.

    Traduci

  5. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 5, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 5, immagine 2 di 2

    • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

    Traduci

  7. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 6, immagine 1 di 1

    • Disconnect the antenna cable from the motherboard using tweezers.

    Traduci

  8. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 7, immagine 1 di 1

    • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

    Traduci

  9. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 8, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 8, immagine 2 di 2

    • Lift the motherboard out of the base of the phone.

    Traduci

  10. Samsung Captivate Glide QWERTY Keyboard Replacement, QWERTY Keyboard: passo 9, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement, QWERTY Keyboard: passo 9, immagine 2 di 2

    • Remove the eight screws using the #00 screw driver.

    Traduci

  11. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 10, immagine 1 di 2 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 10, immagine 2 di 2

    • Remove blue tape using the tweezers.

    Traduci

  12. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 11, immagine 1 di 1

    • Remove screws using the #00 screwdriver.

    Traduci

  13. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 12, immagine 1 di 1

    • Using the plastic opening tool, remove the back plate by prying on the four main points.

    • You may encounter difficultly at certain points. Work the plastic opening tool along the edge to keep back plate from closing again.

    Traduci

  14. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 13, immagine 1 di 1

    • Lift the back plate.

    • To remove the attached flex cable, gently peel the flex cable connecting to the back plate.

    • Flex cable is attached to the back plate with an adhesive.

    Traduci

  15. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 14, immagine 1 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 14, immagine 2 di 3 Samsung Captivate Glide QWERTY Keyboard Replacement: passo 14, immagine 3 di 3

    • Slide the flex cable through the slot.

    • Set the front plate down. Now you have free access to the keyboard.

    Traduci

  16. Samsung Captivate Glide QWERTY Keyboard Replacement: passo 15, immagine 1 di 1

    • Manually lift the keyboard and replace with new keyboard.

    • Make sure the new keyboard is placed with the keyboard letters facing down, and the white back facing up.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Jessica Martinez

Membro da: 09/25/14

260 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

USF Tampa, Team 5-3, Mcgee Fall 2014 Membro di USF Tampa, Team 5-3, Mcgee Fall 2014

USFT-MCGEE-F14S5G3

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 412