Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Here is the Samsung SCH-U380 Brightside
-
Turn it over to gain access to the battery.
-
Remove the backcover by simply pulling it off the phone from the top down
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the battery
-
Remove the six Phillips screws from the back frame
-
All six screws are identical M1.5X3
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool or similar tool to separate the top from the bottom frame. Applying slight pressure in a downwards direction will disengage the plastic clips
-
Continue to slide the tool along the slot until you feel the plastic locks disengage
-
Once all locks have released, the bottom frame can simply be removed.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two Phillips screws from the EMI shield.
-
Both screws are identical M1.5X2
-
Remove the EMI shield
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Detach the LCD connector.
-
Remove the logic board
-
This is the speaker module. In the center is the camera, but it is not part of the module.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
turn the logic board over. The speaker module is held in place
-
by one Phillips screw
-
and two clips
-
Remove the Phillips screw.
-
It is a M1X2 Phillips screw
-
Next disengage one of the clips by simply applying some sideways pressure with your fingernail. This will loosen the module.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the logic board around. With the speaker module loose, simply lift it off the board.
-
Speaker module removed.
-
Camera
-
and audio jack
-
are not part of this module and will remain on the board.
-