Salta al contenuto principale

Samsung Blast Back Cover Replacement

Cosa ti serve

  1. Samsung Blast Back Cover Replacement, Back Cover: passo 1, immagine 1 di 1
    • Place the phone face down on the table. Locate a Phillips head screwdriver. Begin by first removing the four screws that surround the upper area of the Samsung phone.

  2. Samsung Blast Back Cover Replacement: passo 2, immagine 1 di 1
    • Next, remove the side button by prying open the the side of the phone with a prying tool. Insert the prying tool between the back cover and the remainder of the phone. Slide the prying tool to the left, creating a division between the cover and the phone.

  3. Samsung Blast Back Cover Replacement: passo 3, immagine 1 di 1
    • Continue using the prying tool to unlock the phone. If you hear a popping sound you know that you are on the right track. Be gentle as to not snap the screw-posts inside the case.

  4. Samsung Blast Back Cover Replacement: passo 4, immagine 1 di 1
    • Finally, remove the back cover by gently lifting the case up, ensuring that nothing is still attached to the cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 172