Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

A guide on how to replace a damaged DC power board on a Samsung BD-7500.

  1. Remove the three 10mm screws with a Phillips #0 screwdriver.
    • Remove the three 10mm screws with a Phillips #0 screwdriver.

    • Pry the top off with a plastic opening tool.

  2. Remove the three screws holding down the cover with a Phillips #0 screwdriver.
    • Remove the three screws holding down the cover with a Phillips #0 screwdriver.

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora
  4. Lift up the power cord at its base to remove it.
    • Lift up the power cord at its base to remove it.

  5. Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.
    • Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.

  6. Remove the 7mm screw with a Phillips #1 screwdriver.
    • Remove the 7mm screw with a Phillips #1 screwdriver.

    • Grip the blue tab attached to the base and pull upwards.

  7. Grip the edges of the motherboard and pull upwards to remove.
    • Grip the edges of the motherboard and pull upwards to remove.

Conclusione

To reassemble your device, follow these instructions in reverse order.

samer odeh

Membro da: 13/02/2018

313 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S16-G4, Boczar Spring 2018 Membro di USF Tampa, Team S16-G4, Boczar Spring 2018

USFT-BOCZAR-S18S16G4

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 191